Use biocides safely. Always read the label and product information before use.
Type | GRP laminates, wood, aluminium, steel | |||||
Place | Below waterline | |||||
Function | Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat. | |||||
Application | brush, roll, airless spray gun (only professional) | |||||
Thinning * | No recommended | |||||
Theoretical coverage For 1l | by roller | by spray | ||||
9 ~ 10 m² | 3 ~ 5 m² | |||||
Coat thickness (WTF) | 98 μm | 196 μm | ||||
Finish thickness (DTF) | 50 μm | 100 μm | ||||
Coats number | 2 | 1 | ||||
Recommended dry layer | 100 μm | |||||
Hardening the surfaces | 23ºC | 15ºC | ||||
Touch dry | 30 minutes | 45 minutes | ||||
Immersion: | 8 hours | 12 hours | ||||
Dry to recoat (overcoating) | min. 6 hours | min. 10 hours | ||||
Dry to launch (immersion times) | max 6 months | max 6 months | ||||
Pack | 0,75 l | 2,5 l | ||||
Color ** | code | code | ||||
red navy black | 300008382 300008384 300008386 | 300008381 300008383 300008385 |
In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.
Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.
Exposure of a freshly applied antifouling paint to moist air can lead to color change.
The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.
Self-polishing Antifouling Paint: Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed […]
THIN FILM Silver Racing is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime. Ideal […]
BRUSH PROFESSIONAL Sea-Line® BRUSH Sea-Line® ROLL AND HOLDER ROLL Sea-Line® PAINT TRAY Sea-Line® MIXER FOR PAINT Sea-Line® STORAGE – PLASTIC […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work