Language:

S2 EXTRA SHINE HOLOGRAM REMOVER

Home » Products » Polishing system » S2 EXTRA SHINE HOLOGRAM REMOVER
Zabezpieczenie łodzi
S2 EXTRA SHINE HOLOGRAM REMOVER

S2 EXTRA SHINE HOLOGRAM REMOVER FINISHING COMPOUND

NO SILICONE


Sea-Line® S2 finishing compound is universal for all types of finishing coatings. Eliminates defects after polishing and provides a perfect mirror finish. High quality minerals provide immaculate polishing, a mirror finish without holograms, and the optimal proportion of solids and a binder keeps your work area clean and makes the residual product easy to remove. Does not contain silicone.

For surfaceGelcoat, topcoat, composites, poliuretan paints.
Functionfinishing compound without scratching
removes marks, swirls and holograms
gives a high shine finish with good depth and clarity
Type of damageScratches on dark colors
ApplicationHand or machine
Recommended applicatorLamb wool,

soft sponge

Pack0,500 kg
code 300005581
ColorLight blue

Polishing with Sea-Line® – instructional video




Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę