Language:

Modernization of the electrical network

Home » News and promotions » Modernization of the electrical network
Szpachlówki do łodzi
Modernization of the electrical network

On Monday, October 18, 2021 and Friday, October 22, 2021, modernization works of the electrical network will be carried out in the area where our headquarters is located. This work will result in electric power cuts. Due to the above, on these days, the execution of orders will be postponed to the next day. Please plan your orders keeping in mind the possible longer realisation time.

Communication by email and office phones may be limited. In urgent cases, please contact us at the following telephone numbers:

Sławek Kukielewski phone: +48 604 821 461

Marta Wieder-Pokorska phone: +48 604 807 476

Karol Szkutnik tel: +48 602 712 435

We apologize for the inconvenience and we ask for your understanding.


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Can I use yacht paints for a drinking water tank?

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę