Language:

Our working hours during the virus threat

Home » News and promotions » Our working hours during the virus threat
Farby szkutnicze
Our working hours during the virus threat

Since May 18th we change our working time.
We are available from Monday to Friday from 8 a.m. to 3:00 p.m.

We are pleased to advise you what specific products will be useful for selected works, where to buy our products or how to become distributor for our products.
Our phone numbers (48) 604 821 461 and (+48) 94 35 316 75
We are also available by e-mail info@sea-line.eu

We continue to ensure the safety of employees and the continuity of our production plants. We take all preventive measures to reduce the risk of virus in our environment.


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę