NEW PRODUCT – polishing compound S08 INDUSTRIAL FORCE CUT

We starting new year with new product – polishing compound S08 INDUSTRIAL FORCE CUT.

Why S08 INDUSTRIAL FORCE CUT ?
This polishing compound have one the highest cut level, it allows to remove defects after using sand paper P600. It can be used on hardest surfaces, finished products made of laminate and for molds. Polishing compound will be especially used for light-colored surface.

For whom S08 INDUSTRIAL FORCE CUT ?
S08 INDUSTRIAL FORCE CUT was designed for manufacture which want to in fast way prepare products for next stage of productions.

Advantages S08 INDUTRIAL FORCE CUT :

Highest cut level
Shorter work time
Less sand papers needed, it works after sand paper P600
Does not contains silicon and wax
It doesn`t clog polishing applicator

All details about product are HERE (click)

Our FAQ

Answers to frequently asked questions

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Possible causes

No thinning, wrong thinner or wrong amount of thinner
Wrong type of roll or brush (wrong bristle lenght)
Applying too much or too Little paint,
During painting process temperature was too high or the air was too dry,
Incorrect preparation of too porous surface,
Incorrect proportion of thinner.

How to prevent

Use a brush/Toller suited to the type of surface or paint,
Use thinner which is dedicated to the type of application and paints
Use thinning proportions which was indicated by manufacturer,
Paint in right atmosphere conditions indicated by manufacturer,

How to remove

Grind, clean and paint again.

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Our offer

Familiarize yourself with our offer of boatbuilding materials and paints

Fillers
Smooth surface
Refilling and to tackle inequalities caused by damage to or during the course of production
Fillers
Primers
Safeguard
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Primers
Topcoats
Aesthetics and beauty
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Topcoats
Antifouling
Bottom protection
Protect the hull from fouling with algae and shells
Antifouling
Polishing
Color and gloss
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Polishing
Cosmetics
Care and protection
Special preparations for effective cleaning and refinishing
Cosmetics
Resins and repair kits
Repairs and laminating
Laminating, gluing and filling in cracks in gelcoat
Resins and repair kits
Adds
Adds
Range of products useful in the boat builder work
Adds