Γλώσσα:

Selfpolishing Antifouling Paint

Ιστοσελίδα » Προϊόντα » Αντιρρυπαντικά » Selfpolishing Antifouling Paint
Farby szkutnicze
Selfpolishing Antifouling Paint


Use biocides safely. Always read the label and product information before use.

ΤύποςΕλάσματα GRP , ξύλο,χάλυβας
θέσηΚάτω από την ίσαλο γραμμή
ΛειτουργίαΤα Αντιρρυπαντικά Χρώματα αποθαρρύνουν  την ανάπτυξη της σκληρής και μαλακής ρύπανσης και άλλης θαλάσσιας  ζωής κάτω  από την ίσαλο γραμμή του σκάφους
Εφαρμογήπινέλο, ρολό, πιστόλι βαφής
ΔιαλυτικόΌχι
Θεωρητική καλυπτική ικανότητα για 1 l8-9 m2 για
75 μmWFT/
40 μm DFT
Αριθμός στρώσεων1 – 3
Χρόνος διάρκειας μείγματος σε 20°CMin 5h Max 7 days
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμοMin 12h
Συσκευασία 0,750l

code

2,5l

code

Χρώμα:
γκρι
Κόκκινο
Σκούρο μπλέ
Πράσινο
Μαύρο
300005599
300005600
300005602
300005601
300005598
300005477
300005481
300005479
300005478
300005480

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

** COLOR NOTICE:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint. Due to the content of copper oxide, a small color difference between the parts of the antifouling paint is acceptable.


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Selfpolishing Antifouling Paint


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę