Γλώσσα:

Selfpolishing Antifouling Paint ALU PLUS

Ιστοσελίδα » Προϊόντα » Αντιρρυπαντικά » Selfpolishing Antifouling Paint ALU PLUS
Farby dla jachtów
Selfpolishing Antifouling Paint ALU PLUS


Use biocides safely. Always read the label and product information before use.

τύποςΑλουμινιο , ελάσματα GRP , ξύλο,χάλυβας
θέσηΚάτω από την ίσαλο γραμμή
ΛειτουργίαΤα Αντιρρυπαντικά Χρώματα αποθαρρύνουν  την ανάπτυξη της σκληρής και μαλακής ρύπανσης και άλλης θαλάσσιας  ζωής κάτω  από την ίσαλο γραμμή του σκάφους
Εφαρμογήπινέλο, ρολό, πιστόλι βαφής
ΔιαλυτικόΌχι
Θεωρητική καλυπτική ικανότητα για 1 l11-12 m2 για
75 μmWFT/40 μm DFT
Αριθμός στρώσεων1 – 3
Χρόνος διάρκειας μείγματος σε 20°CMin 5h Max 7 days
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμοMin 12h Max 6 months
Συσκευασία0,750l2,5l
Χρώμα Ασπρο **codecode
white

navy / blue

black

5859

8026

8029

5861

8027

8030

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

** COLOR NOTICE:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.

Farba-antyporostowa-ALU-PLUS


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę