Tipo de embarcación | Laminado, madera, acero | |
Lugar | Por debajo de la linea de flotación | |
Función | Se utilizan para proteger el casco contra de la contaminación provocada por las algas y conchas. | |
Aplicación | brocha, rodillo | |
Diluición * | No recomendado | |
Rendimiento teorético 1l | 8-9 m2 para 115 μmWFT/ 50 μm DFT | |
Número de capas | 1 – 3 | |
Tiempo entre capas sin necesidad de lijar | min.5 h min – max 7 días | |
Embalaje | 0,750l | 2,5 l |
Color **: | código : | |
Negro Gris rojo Verde Azul | 300005598 300005599 300005600 300005601 300005602 | 300005480 300005477 300005481 300005478 300005479 |
En el caso de altas temperaturas y la necesidad de diluir la pintura antiincrustante, se recomienda una dilución máxima de 0-5% (por volumen). La dilución y el método de aplicación afectan directamente el espesor de la capa de pintura antiincrustante. Se debe prestar especial atención a la obtención de un espesor de recubrimiento específico (100 μm DTF), lo que garantiza el funcionamiento efectivo de la pintura antiincrustante.
Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint. Due to the content of copper oxide, a small color difference between the parts of the antifouling paint is acceptable.
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
BROCHA SEA-LINE® PROFESIONAL BROCHA SEA-LINE® RODILLO TERCIOPELO SEA-LINE® BANDEJA PARA PINTURA SEA-LINE® MEZCLADOR DE PINTURA SEA-LINE® VASOS DE PLASTICO GRADUADOS SEA-LINE® COLADOR […]
CINTA DE BARNIZAR CINTA DE BARNIZAR IMPERMEABLE MASTER CINTA UNIVERSAL – PLATA CINTA DE BARNIZAR La cinta de barnizar de […]
Mascara para polvo Guantes de nitrilo MASTER Guantes de nitrilo desechables Mono de trabajo desechable Mono de trabajo de poliéster […]
Recomendado para disengrasar la superficie antes de pintar Envase de concentrado : 1 l / código: 3990 INFORMACIONES TÉCNICAS: TDS […]
SILVER SPEED HARD ANTIFOULING available only in: Germany Austri (Österreich) France Italian no UE countries
Pintura autopulimentable antifouling SEAGUARD no contiene sustancias activas o biocidas tóxicos, lo que es importante sobre todo en el caso […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
HARD ANTIFOULING paint: Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed […]
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.
Para rellenar cavidades y hacer frente a las desigualdades causadas por daños o durante el curso de la producción
Barcos de superficie de impacto de las actividades de ósmosis y la corrosión destructiva en ambientes hostiles
Protección contra el agua y contra los efectos negativos de los rayos UV
Proteger la parte inferior de la embarcación antes de las incrustaciones de algas y conchas. Protección contra el agua
Eliminación efectiva de arañazos, color refrescante y gelcoat brillo o pintura
Preparaciones especializados para la limpieza y restauración efectiva
Laminación, encolado y relleno de fisuras en gelcoat
Una serie de productos útiles durante el constructor de barcos de trabajo