Γλώσσα:

SELECTION OF POLISHING COMPOUNDS TO POLISHING HEADS

Ιστοσελίδα » Προϊόντα » Σύστημα στίλβωσης » SELECTION OF POLISHING COMPOUNDS TO POLISHING HEADS
Szpachlówki do łodzi

Polishing systems meet all stages of production, as well as during repair work, renovations or treatments.

Different hardness of materials, colors and expected finish level require the use of different cutting force polishing compounds and specialized heads, sponges or fur.The table shows the proper selection of Sea-Line polishing compounds for various types of polishing heads.

PRODUCT :SEA-LINE®
S0		SEA-LINE®
SO5		SEA-LINE®
S1		SEA-LINE®
S1 PREMIUM
SEA-LINE®
S2
CUTTING FORCE8 / 109 / 106 / 108 / 102 / 10
GLOSS LEVEL6 / 108 / 106 / 89 / 1010 / 10
PAPER GRADATIONBRIGHT COLOURS AND SURFACES OF LOW OR AVERAGE HARDNESS
P800⇒P800⇒P1200⇒P800⇒P3000⇒
DARK COLOURS AND SURFACES OF HIGH HARDNESS
P1200⇒P1200⇒P1500⇒P1200⇒P3000⇒
MATERIALS DIFFICULT TO POLISH (PLEXI, POLICARBONATES)
XP1500⇒P2000⇒P1500⇒X
UV PROTECTION LEVELXXVERY LOWXAVERAGE
MANUAL LABOUR√√√√√
ROTARY MACHINE√√√√√
ORBITAL MACHINEOPTIONAL

( P2000⇒)

OPTIONAL

( P2000⇒)

XOPTIONAL

( P2000⇒)

√
TYPE OF SURFACES
TOOL GELCOAT√√√√X
GELCOAT√√√√√
POLYURETHANE PAINTSXOPTIONAL√√√
INDUSTRIAL PAINTS√√√√√
OTHER PAINTSOPTIONAL√√√√
PLEXI, POLICARBONATESOPTIONAL√√√OPTIONAL
CHOOSING APPROPRIATE APPLICATOR SEA-LINE®
SHEEP WOOL FOR GELCOAT SEA-LINE®
X
SHEEP WOOL POLISHING BALL (∅80mm)X
LAMBSWOOL TYPE D
X
LAMBSWOOL TYPE mm
“BRAYT „PROFI” POLISHING SPONGE
X
“BRAYT „FINISH” POLISHING SPONGE
POLISHING SPONGEWHITE
X
PINK
X
YELLOW
BLACKXX

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę