Γλώσσα:

SELECTION OF POLISHING COMPOUNDS TO POLISHING HEADS

Ιστοσελίδα » Προϊόντα » Σύστημα στίλβωσης » SELECTION OF POLISHING COMPOUNDS TO POLISHING HEADS
Szpachlówki do łodzi

Polishing systems meet all stages of production, as well as during repair work, renovations or treatments.

Different hardness of materials, colors and expected finish level require the use of different cutting force polishing compounds and specialized heads, sponges or fur.The table shows the proper selection of Sea-Line polishing compounds for various types of polishing heads.

PRODUCT :SEA-LINE®
S0		SEA-LINE®
SO5		SEA-LINE®
S1		SEA-LINE®
S1 PREMIUM
SEA-LINE®
S2
CUTTING FORCE8 / 109 / 106 / 108 / 102 / 10
GLOSS LEVEL6 / 108 / 106 / 89 / 1010 / 10
PAPER GRADATIONBRIGHT COLOURS AND SURFACES OF LOW OR AVERAGE HARDNESS
P800⇒P800⇒P1200⇒P800⇒P3000⇒
DARK COLOURS AND SURFACES OF HIGH HARDNESS
P1200⇒P1200⇒P1500⇒P1200⇒P3000⇒
MATERIALS DIFFICULT TO POLISH (PLEXI, POLICARBONATES)
XP1500⇒P2000⇒P1500⇒X
UV PROTECTION LEVELXXVERY LOWXAVERAGE
MANUAL LABOUR√√√√√
ROTARY MACHINE√√√√√
ORBITAL MACHINEOPTIONAL

( P2000⇒)

OPTIONAL

( P2000⇒)

XOPTIONAL

( P2000⇒)

√
TYPE OF SURFACES
TOOL GELCOAT√√√√X
GELCOAT√√√√√
POLYURETHANE PAINTSXOPTIONAL√√√
INDUSTRIAL PAINTS√√√√√
OTHER PAINTSOPTIONAL√√√√
PLEXI, POLICARBONATESOPTIONAL√√√OPTIONAL
CHOOSING APPROPRIATE APPLICATOR SEA-LINE®
SHEEP WOOL FOR GELCOAT SEA-LINE®
X
SHEEP WOOL POLISHING BALL (∅80mm)X
LAMBSWOOL TYPE D
X
LAMBSWOOL TYPE mm
“BRAYT „PROFI” POLISHING SPONGE
X
“BRAYT „FINISH” POLISHING SPONGE
POLISHING SPONGEWHITE
X
PINK
X
YELLOW
BLACKXX

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I use yacht paints for a drinking water tank?

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę