Lengua:

Polski Sukces

Página web » Premios » Polski Sukces
Farby dla jachtów

”Polski Sukces” Polaco Concurso de Promoción de las Empresas Polacas de Éxito Industrial El organizador de este concurso es Polaca Asociación Foro de la Promoción de Negocio.

El programa de promoción realizado por el concurso tiene como el objetivo presentar mejores empresas y su carrera industrial que es el resultado de sus propias actividades. .
Promoción de las acciones industriales llevadas a cabo con éxito tiene que serivir para el estímulo de desarrollo de la iniciativa, que es el principal factor que lucha contra el aumento del paro.

El concurso tiene lugar bajo el patrocinio honroso del Ministerio de la Industria, Trabajo y Política Social RP. Somos galardonados de este concurso en los años 2004- 2012.

Lee más: www.polskisukces.pl


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę