Linguaggio:

Styrene free and styrene reduced products

Home » Notizie » Styrene free and styrene reduced products
Farby dla jachtów
Styrene free and styrene reduced products

Considering new regulations in several European countries we would like to adjust our products to current expectations.

We are ready to offer you low styrene and styrene free products:

– filler universal styrene free

– filler with fiberglass styrene free

– filler lightweight styrene free

– gelcoat filler styrene free

– filler universal styrene redced

– filler with fiberglass styrene reduced

Basic technical data here.

Please contact us in case of any questions

tel. (+48) 94 35 316 20;
SKYPE: sea-line.eu

EMAIL: info@sea-line.eu


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę