Linguaggio:

PRODOTTI PER LUCIDATURA

Home » Scaricare » PRODOTTI PER LUCIDATURA
Sea-Line
NOME DEL FILESCARICARE
S0 – FAST CUT & MEDIUM GLOSSdownloadscaricare
S05 – ONE STEP, HEAVY CUT & GLOSS (for gelcoat)downloadscaricare
S07 – HEAVY CUT (for gelcoat)downloadscaricare
S08 – INDUSTRIAL FORCE CUTdownloadscaricare
S1 – SOFT CUT & GLOSS (Liquid)downloadscaricare
S1 PREMIUM – ONE STEP, CUT & HIGH GLOSSdownloadscaricare
S2 – EXTRA SHINE HOLOGRAM REMOVER (pasta abrasiva per finitura)downloadscaricare
S3 – FINISH CLEANER (shine control)downloadscaricare
S4 – PROTECT WAXdownloadscaricare
S5 – QUICK WAXdownloadscaricare

Le nostre FAQ
Risposte alle domande più frequenti

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę