Language:

TDS SDS – topcoats paints

Home » Download » TDS SDS – topcoats paints
Farby szkutnicze
FILE NAMEDOWNLOAD
TDSSDS
PRODUCTHARDENER
(comp. A)(comp. B)
POLYURETHAN CLEAR COATdownloaddownloaddownload
POLYURETHAN 2:1 (color)downloaddownloaddownload
SPRAY THINNERdownloaddownloadX
BRUSH / ROLL THINNERdownloaddownloadX
YACHT VARNISH 1KdownloaddownloadX
YACHT ENAMEL 1KdownloaddownloadX
THINNER 1K (for primer, varnish, enamel) XdownloadX
TOP MODELCOAT 2:1downloaddownloaddownload
SPRAY THINNER for top modelcoatXdownloadX
O1 TEAK OILdownloaddownloadX
NON SKID POWDERXdownloadX
CLEANERXdownloadX

Our FAQ
Answers to frequently asked questions

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę