Lengua:

S5 Quick Wax

Farby antyporostowe
S5 Quick Wax

Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss surfaces (laminate, varnish and glass). After use S5 QUICK WAX we get color depth and gloss. Has an excellent hydrophobic and maintenance properties. Does not leave streaks on the plastics and rubber surfaces.

Sea-Line S5 Quick Wax is a product which is recommended after polishing surfaces with Sea-Line polishing compounds.

Wax can be used on surfaces exposed on sunlight.

Does not leave streaks.


Wash the surface before use Sea-Line® S5 QUICK WAX:

BASIC INFORMATION:

S5 QUICK WAX

Typelaminates (gelcoat)
glass
varnished surfaces
plexi, polycarbonate
FunctionUV protection

Reduces the adhesion of dirt

hydrofobic

Textureliquid

COLOR :

PACKAGING:

APPLICATION:

Use:

Cleaning:

For daily maintenance we should use products which will gonna be safe for wax layer:

Technical information:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę