Lengua:

TEAK OIL – NEW 2017

Página web » Noticias y promociones » TEAK OIL – NEW 2017
Zabezpieczenie łodzi
TEAK OIL – NEW 2017

TEAK OIL – NEW 2017

O1 Teak Oil is new product of brand Sea-Line which completes former offer products dedicated for wood protection.

O1 Teak Oil  is one-component oil for exotic wood. Oil for exotic wood which is difficult to impregnate; teak, mahogany, ipe wood, movingiu wood, etc. Excellent penetrating qualities into wood structure and does not leave any greasy layer on surface. O1 TEAK OIL protects wood from dampness and mold growth. It can be applied above and below the waterline as well as inwards it creates an isolating layer, easy in maintenance .
O1 Teak Oil does not change the color of wood. Thanks that it can be used also in garden or home: garden furniture, terraces, parquet, windows,doors etc. O1 Teak Oil should be apply until overall saturation of wood is achieved.
O1 Teak Oil is available in volume 2,5 l and 250 ml. The smaller package was created for those clients which have small elements made of wood.

Theoretical output about 11-12 m2 per litre.


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę