Lengua:

Do you know that last year we modern epoxy fillers recipes?

Página web » Noticias y promociones » Do you know that last year we modern epoxy fillers recipes?
Naprawa łodzi
Do you know that last year we modern epoxy fillers recipes?

Do you know that last year we modern epoxy fillers recipes?  To avoid confusions check on label if product is marked with ikon “new” or not. To find TDS and SDS cards please click this link DOWNLOAD.

Below differences for each Sea-Line epoxy filler.

.

.

.

.

Epoxy filler lightweight

 Epoxy filler lightweightOld recipeNew recipeDiffierences
ColorWhiteWhiteNo changes
Setting time24h20hA faster hardened product means faster readiness for further processing
Pot life 20ﹾC50 minutes50 minutesNo changes
Weight1L = 850 grams1L = 700 gramsLower product’s own weight
Proportions of mixingBy weight – 100:53

By volume – 2:1

By weight – 100:100

By volume – 1:1

Easier proportions of compounds mixing

Epoxy filler universal

Epoxy filler universalOld recipeNew recipeDiffierences
ColorGrayLight grayLighter shade of the new filler
Setting time5h15hLonger setting time
Pot life 20ﹾC10 minutes40 minutes30 minutes longer pot life
Weight1L = 1600 grams1L = 1540 gramsLower product’s own weight
Proportions of mixingBy weight – 100:44

By volume – 2:1

By weight – 100:50

By volume – 2:1

Easier proportions of compounds mixing

 

Epoxy filler with fibreglass

 Epoxy filler with fibreglassOld recipeNew recipeDiffierences
ColorLight greenLight grayColor changes
Setting time24h16hSetting time reduced
Pot life 20ﹾC25 minutes50 minutes25 minutes longer pot life
Weight1L = 1800 grams1L = 1550 gramsLower product’s own weight
Proportions of mixingBy weight – 100:50

By volume – 1:1

By weight – 100:50

By volume – 2:1

Easier proportions of compounds mixing

 

.

.

troton (37)

troton (40)


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I degrease surfaces with acetone?

We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę