Γλώσσα:

C2 ΣΥΜΠΥΚΝΩΜΕΝΟ ΚΑΘΑΡΙΣΤΙΚΟ

Ιστοσελίδα » Προϊόντα » Καλλυντικά » C2 ΣΥΜΠΥΚΝΩΜΕΝΟ ΚΑΘΑΡΙΣΤΙΚΟ
Producent farb jachtowych
C2 ΣΥΜΠΥΚΝΩΜΕΝΟ ΚΑΘΑΡΙΣΤΙΚΟ

Πολύ ισχυρό, υδατοδιαλυτό και βιοδιασπώμενο καθαριστικό, για γρήγορη και αποτελεσματική απομάκρυνση ελαίων, γράσων, σκουριά, καπνίλας αιθάλης, νικοτίνη κλπ. Εξαιρετικό σαν επαγγελματικό καθαριστικό για μπαλόνια , Μουσαμάδες, ιστούς και αλουμινένια στοιχεία του σκάφους και για την αφαίρεση διαροών υδραυλικού ελαίου.

Οδηγίες Εφαρμογής

Διαλύστε σε νερό.
Για κανονικούς ρύπους χρησημοποιείστε διάλυμα C2 προς Nερό 1:10 μέρη
Για βαριούς ρύπους χρησημοποιείστε διάλυμα C2 προς Nερό 1:5 μέρη
Μπορεί να διαλυθεί με ζεστό ή κρύο νερό. Για την εφαρμογή του χρησημοποιείστε βούρτα ή πανί. Μετά την εφαρμογή πάντοτε ξεπλένεται με άφθονο νερό.


Συσκευασία :

STEP BY STEP –CLEANING GRP (gelcoat) by using C2

HOW TO RESTORE GELCOAT ?

Our vessels may sometimes look like the one in the picture below. We can quickly and easily make it look nice. C2 Concentrate Cleaner can be used on all kinds of  gelcoats and varnishes.

C2_CONCENTRATE_CLEANER_czyszczenie_zelkotu_przed

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_ikona

STEP 1 – Prepare Sea-line C2 Concentrate Cleaner

Thin Sea-Line® C2 with water at a ratio of:
o    1:5 for heavy contaminants
o    1:10 for average contaminants

C2_CONCENTRATE_CLEANER_proporcja_mieszania

STEP 2 – Cleaning GPR

Before starting work, clean the surface from contamination, e.g. sand. Using a sponge or a brush, apply C2 Concentrate Cleaner.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu

STEP 3 – Cleaning GPR

Non-slip surface or heavily soiled elements, scrub with a soft brush.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_1

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_2

STEP 4 – Rinse

Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_plukanie

STEP 5 – Protecting GPR/varnish

To increase gloss, the surface may additionally be polished by using Sea-Line S1 or Sea-line S0 compound.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_polerowanie

The cleaned surface protect (optionally) with Sea-Line S4 Protect Wax & Sea-Line S3 Clean & Protect spray

C2_CONCENTRATE_CLEANER__czyszczenie_laminatu_woskowanie

Sea-Line® C2 CONCENTRATE CLEANER

The picture shows a cleaned surface (right side) and its condition before using C2 Concentrate Cleaner (left side).

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_porownanie


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę