Γλώσσα:

Epoxy repair kit NEW

Szpachlówki i podkłady szkutnicze
Epoxy repair kit NEW

κιτεποξειδικών υλικών επισκευής NEW

Για να αποκτήσετε μια πλήρη και επαρκώς ισχυρή προστατευτική μεμβράνη, χρησιμοποιήστε μια αναλογία 2: 1 βάρος της ρητίνης σε ίνες από γυαλί ματ για εποξειδικά ή βάρος 1: 1 αναλογία ρητίνης σε ύφασμα γυαλί

Γιανα τελειώσουν οι από κολλημένα φύλλα επιφάνειες, συνιστούμε να χρησιμοποιήσετε εποξειδικών υλικών πάχυνσης (fillers) Sea-Line ®, εποξειδικών αστάρια Sea-Line ®, τελικών χρωμάτων topcoats Sea-Line ®


τύποςΕλάσματα GRP, ξύλο,χάλυβας,αλουμίνιο
θέσηΠάνω και κάτω από την ίσαλο γραμμή
Πολυστρωμάτωση , επισκευές , ενίσχυση , κόλλημα
Εφαρμογήπινέλο, ρολό
ΔιαλυτικόΔεν συνιστάται
Αριθμός στρώσεωνΕξαρτώνται από τις ανάγκες
Χρόνος διάρκειας μείγματος σε 23°C45 min
Χρόνος σκλήρυνσης7 h
χρώμαΔιαφανές
Συσκευασία250 g
Code3636

Hρητίνη είναι διαθέσιμες σε σετ των 250 g σύνολο :


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę