Γλώσσα:

UNIVERSAL YACHT PRIMER 1K

Ιστοσελίδα » Προϊόντα » Στρωτήρες » UNIVERSAL YACHT PRIMER 1K
Sea-Line
UNIVERSAL YACHT PRIMER 1K


TypeGRP- laminates, wood, stel
PlaceAbove and below waterline
FunctionGrounding
Intercoating
Applicationbrush, roll, spray gun
ThinningThinner for 1 – component primer, varnisch, enamel
Theoretical coverage For 1l~7 m2 for 140 μm WFT/ 65 μm DFT
Number of coats1 – 5
Dust dry 20°C1 h
Resistant against rain 20°C4 h
Waterproof 20°C16 h
Time to launch 20°Cmin. 24 h
Elapsed time before applying next coat 20°Cmin. 5 h
Color (matt)grey
Pack0,750 l2,5 l
code81728174

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από UNIVERSAL YACHT PRIMER 1K


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę