Γλώσσα:

Πολυστρωμάτωση – ινών ματ και υφασμάτων από γυαλί

Ιστοσελίδα » Προϊόντα » Συμπληρωματικά προϊόντα » Πολυστρωμάτωση – ινών ματ και υφασμάτων από γυαλί
Farby szkutnicze
Πολυστρωμάτωση – ινών ματ και υφασμάτων από γυαλί

GLASS FIBRE MATE

Glass fibre mat, in connection with laminating resin, is used for the repairs of big holes in boats, yachts, camping caravans, etc. The repaired elements may be made from steel, aluminum or GRP, reinforced with glass fibre. The obtained layers have very good adherence, are durable, resistant to petrol, oils, greases, and the short period temperatures up to 70ºC.

GLASS FABRIC

Glass fabric are used in the production of laminates, as a resin reinforcement. Allows for a higher glass content in the laminate and better durability. Minimizes the amount of resin necessary for the production of laminates while increasing durability.

To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat or 1:1 weight ratio of resin to glass fabric.


To finish laminated surfaces we recommend to use :

Glass fiber mat for polyester resin

packg / m²codetheoretical efficiency resin for 1 pack
1 m²150 g / m²4490~ 300 g
300 g / m²4493~ 600 g
450 g / m²4496~ 900 g
3 m²150 g / m²4491~ 900 g
300 g / m²4494~ 1,8 kg
450 g / m²4499~ 2,7 kg

Glass fiber mat for epoxy resin

packg / m²codetheoretical efficiency resin for 1 pack
1 m²300 g / m²4480~ 600 g
450 g / m²4483~ 900 g
3 m²300 g / m²4481~ 1,8 kg
450 g / m²4484~ 2,7 kg

Glass fabric for polyester and epoxy resin

packg / m²codetheoretical efficiency resin for 1 pack
1 m²200 g / m²4464~ 200 g
400 g / m²4466~ 400 g
3 m²200 g / m²4465~ 600 g
400 g / m²4467~ 1, 2 kg

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Πολυστρωμάτωση – ινών ματ και υφασμάτων από γυαλί


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę