Glass fibre mat, in connection with laminating resin, is used for the repairs of big holes in boats, yachts, camping caravans, etc. The repaired elements may be made from steel, aluminum or GRP, reinforced with glass fibre. The obtained layers have very good adherence, are durable, resistant to petrol, oils, greases, and the short period temperatures up to 70ºC.
Glass fabric are used in the production of laminates, as a resin reinforcement. Allows for a higher glass content in the laminate and better durability. Minimizes the amount of resin necessary for the production of laminates while increasing durability.
To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat or 1:1 weight ratio of resin to glass fabric.
pack | g / m² | code | theoretical efficiency resin for 1 pack |
1 m² | 150 g / m² | 4490 | ~ 300 g |
300 g / m² | 4493 | ~ 600 g | |
450 g / m² | 4496 | ~ 900 g | |
3 m² | 150 g / m² | 4491 | ~ 900 g |
300 g / m² | 4494 | ~ 1,8 kg | |
450 g / m² | 4499 | ~ 2,7 kg |
pack | g / m² | code | theoretical efficiency resin for 1 pack |
1 m² | 300 g / m² | 4480 | ~ 600 g |
450 g / m² | 4483 | ~ 900 g | |
3 m² | 300 g / m² | 4481 | ~ 1,8 kg |
450 g / m² | 4484 | ~ 2,7 kg |
pack | g / m² | code | theoretical efficiency resin for 1 pack |
1 m² | 200 g / m² | 4464 | ~ 200 g |
400 g / m² | 4466 | ~ 400 g | |
3 m² | 200 g / m² | 4465 | ~ 600 g |
400 g / m² | 4467 | ~ 1, 2 kg |
BRUSH PROFESSIONAL Sea-Line® BRUSH Sea-Line® ROLL AND HOLDER ROLL Sea-Line® PAINT TRAY Sea-Line® MIXER FOR PAINT Sea-Line® STORAGE – PLASTIC […]
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
Gelcoat based on IZO/NPG resin, thanks to which it achieves good resistance to weather conditions and high mechanical properties. Primarily […]
BRUSH PROFESSIONAL Sea-Line® BRUSH Sea-Line® ROLL AND HOLDER ROLL Sea-Line® PAINT TRAY Sea-Line® MIXER FOR PAINT Sea-Line® STORAGE – PLASTIC […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work