Γλώσσα:

Selfpolishing Antifouling Paint ALU PLUS

Ιστοσελίδα » Προϊόντα » Αντιρρυπαντικά » Selfpolishing Antifouling Paint ALU PLUS
Sea-Line
Selfpolishing Antifouling Paint ALU PLUS


Use biocides safely. Always read the label and product information before use.

τύποςΑλουμινιο , ελάσματα GRP , ξύλο,χάλυβας
θέσηΚάτω από την ίσαλο γραμμή
ΛειτουργίαΤα Αντιρρυπαντικά Χρώματα αποθαρρύνουν  την ανάπτυξη της σκληρής και μαλακής ρύπανσης και άλλης θαλάσσιας  ζωής κάτω  από την ίσαλο γραμμή του σκάφους
Εφαρμογήπινέλο, ρολό, πιστόλι βαφής
ΔιαλυτικόΌχι
Θεωρητική καλυπτική ικανότητα για 1 l11-12 m2 για
75 μmWFT/40 μm DFT
Αριθμός στρώσεων1 – 3
Χρόνος διάρκειας μείγματος σε 20°CMin 5h Max 7 days
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμοMin 12h Max 6 months
Συσκευασία0,750l2,5l
Χρώμα Ασπρο **codecode
white

navy / blue

black

5859

8026

8029

5861

8027

8030

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

** COLOR NOTICE:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.

Farba-antyporostowa-ALU-PLUS


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę