Γλώσσα:

Πολυουρεθάνη τελικά χρώματα topcoat

Ιστοσελίδα » Προϊόντα » Τελικά χρώματα Topcoats » Πολυουρεθάνη τελικά χρώματα topcoat
Naprawa łodzi
Πολυουρεθάνη τελικά χρώματα topcoat

τελικά χρώματα topcoat yacht paint Πολυουρεθάνης συνιστώνται κυρίως πάνω από την ίσαλο γραμμή


τύπος Ελάσματα GRP,ξύλο, χάλυβας , αλουμίνιο
θέση Πάνω από την ίσαλο γραμμή
Λειτουργία Υψηλής γυαλάδας τελικό χρώμα
Εφαρμογή πινέλο, ρολό, πιστόλι βαφής
Διαλυτικό Επιλογή:διαλυτικό PU για ρολο/βούρτσα
Θεωρητική καλυπτική ικανότητα για 1 l 13-14 m2 για

75 μmWFT/ 40 μm DFT

Αριθμός στρώσεων 2 – 3
Χρόνος διάρκειας μείγματος σε 20°C 3 h
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμο 30 λεπτό
Συσκευασία 0,750l     ή   15 l
Χρώμαcode
Ασπρο –White56536222
Εκρού –Light ivory56577727
Κόκκινο –Ruby red5656X
βαθυγάλαζος –Sapphire blue56557779
Μπλέ –Sky blue81638162
Πράσινο –Mint green7322X
Γκρι –Squirrel grey74387439
Μαύρο –Jet black62627994

ROLLER / BRUSH



SPRAY



During paint job is recommend to use products from one batch

Farba-poliuretanowa


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Πολυουρεθάνη τελικά χρώματα topcoat


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę