Langue:

Laque polyuréthane couleur – éclat

Accueil » Produits » Vernis de revêtement » Laque polyuréthane couleur – éclat
Kosmetyki do naprawy łodzi oraz jachtów
Laque polyuréthane couleur – éclat


Type de bateauGRP laminates, l’bois, l’acier,
l’aluminium
EndroitAu dessus de la ligne de flottaison (en option – au dessous de la ligne de flottaison)
FunctionBrillant top coat
ApplicationPinceau, rouleau, projection
ThinningOui,
Dilutif à l’application des vernis de revêtement :
– par projection
– avec pinceau /rouleau
Rendement théorétique pour 1l13-14 m2 pour

75 μmWFT /40 μm DFT

Nombre de couches2 – 3
Temps de travail 20°C3 h
Temps entre les couches Sans la nécessité de ponçage30 min
Emballage0,750l    15 l
Couleur :codes:
Blanc –White56536222
Crémeux –Light ivory56577727
Rouge –Ruby red5656X
Bleu marin –Sapphire blue56557779
Bleu –Sky blue81638162
Vert –Mint green7322X
Gris –Squirrel grey74387439
Noir –Jet black62627994

ROLLER / BRUSH



SPRAY



During paint job is recommend to use products from one batch

Farba-poliuretanowa


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais

Produits connexes

de Laque polyuréthane couleur – éclat


Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę