Γλώσσα:

TEAK OIL – NEW 2017

Farby szkutnicze
TEAK OIL – NEW 2017

TEAK OIL – NEW 2017

O1 Teak Oil is new product of brand Sea-Line which completes former offer products dedicated for wood protection.

O1 Teak Oil  is one-component oil for exotic wood. Oil for exotic wood which is difficult to impregnate; teak, mahogany, ipe wood, movingiu wood, etc. Excellent penetrating qualities into wood structure and does not leave any greasy layer on surface. O1 TEAK OIL protects wood from dampness and mold growth. It can be applied above and below the waterline as well as inwards it creates an isolating layer, easy in maintenance .
O1 Teak Oil does not change the color of wood. Thanks that it can be used also in garden or home: garden furniture, terraces, parquet, windows,doors etc. O1 Teak Oil should be apply until overall saturation of wood is achieved.
O1 Teak Oil is available in volume 2,5 l and 250 ml. The smaller package was created for those clients which have small elements made of wood.

Theoretical output about 11-12 m2 per litre.


Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę