Γλώσσα:

Products – polishing system

Ιστοσελίδα » Λήψεις » Products – polishing system
Szpachlówki do łodzi
FILE NAMEDOWNLOAD
TDSSDS
S0 – FAST CUT & MEDIUM GLOSSdownloadλήψεις
S05 – ONE STEP, HEAVY CUT & GLOSS (for gelcoat)downloadλήψεις
S07 – HEAVY CUT (for gelcoat)downloadλήψεις
S08 – INDUSTRIAL FORCE CUTdownloadλήψεις
S1 – SOFT CUT & GLOSS (Liquid)downloadλήψεις
S1 PREMIUM – ONE STEP, CUT & HIGH GLOSSdownloadλήψεις
S2 – EXTRA SHINE HOLOGRAM REMOVER (finishing compound)downloadλήψεις
S3 – FINISH CLEANER (shine control)downloadλήψεις
S4 – PROTECT WAXdownloadλήψεις
S5 – QUICK WAXdownloadλήψεις

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę