Linguaggio:

MS POLYMER NEW PRODUCT IN OFFER

Home » Notizie » MS POLYMER NEW PRODUCT IN OFFER
Farby antyporostowe
MS POLYMER NEW PRODUCT IN OFFER

MS POLYMER NEW PRODUCT IN OFFER

MS POLYMER ist one of the most interesting new product in offer Sea-Line in 2018.
Thanks to advance dispensing system, MS POLYMER does not require extra tools to application, provides exact thickness of weld during application.

Characteristic features of MS POLYMER its resistance to UV and water and salt water), no need to priming and can be covered by any type of paint. MS POLYMER does not discolor surface (does not contain thinners and isocyanate).

MS POLYMER is elastic sealant recommended for sealing and bonding various types of materials, available in colors:

MPS PLYMER NOWOŚĆ


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę