Type | Wood, laminates GRP | |
Place | Below and above waterline | |
Function | – Top coat (without thinner) – Primer (with thinner) | |
Application | brush, roll, spray gun | |
Thinning | Yes Roll/brush thinner or Spray thinner | |
Theoretical coverage For 1l | 12÷13 m2 for 80 μmWFT/ 39 μm DFT | |
Number of coats | 2 – 4 | |
Pot life 20°C | 3 h | |
Time between layers without sanding | min 20 m. | |
Color | None (clear) | |
Pack | 0,750 l | 15 l |
Code | 6749 | 7506 |
PRODUCT DISCRIPTION : O1 TEAK OIL is one-component oil for exotic wood which is difficult to impregnate, e.g.: teakwood, mahogany, […]
Cleaner – recommended to degrease the surface before painting. Silicone remover is the product used for surface cleaning before lacquering. […]
Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of spray polyurethane topcoats — […]
Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount for 750 ml of polyurethane […]
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work