Langue:

Dilutif primaire époxydique

Accueil » Produits » Additives » Dilutif primaire époxydique
Zabezpieczenie łodzi
Dilutif primaire époxydique

Dilutif epoxyde est un mélange de dilutifs organiques choisis.Ce produit est destiné à être utilisé avec Primaire époxydique  et assure meilleurs application et séchage.

Emballage :


Primaire époxydique Lightprimer 5:1e revêtement avec pinceau / rouleau5 – 25%
de revêtement par projection5 – 50%
Primaire époxydique HS anti-osmose 3:2e revêtement avec pinceau / rouleau0 – 5%
de revêtement par projectionnon recommandé
Primaire époxydique Anticorrosif 4:1e revêtement avec pinceau / rouleau5 – 25%
de revêtement par projection5 – 50%
Primaire époxydique Woodprimer 10:4e revêtement avec pinceau / rouleau0 – 5%
de revêtement par projection20 – 30%

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę