Type | wood | ||
Place | Above waterline, interior | ||
Function | High gloss | ||
Application | brush, roll, spray gun | ||
Thinning | Thinner for 1 – component primer, varnisch, enamel | ||
Theoretical coverage for 1l | 12-13 m2 for 80 μm WFT/ 40 μm DFT | ||
Number of coats | 1 ÷ 3 – renewal old varnish 1 ÷ 5 – new wood, creating new coat | ||
Dry to the touch 20°C: | 3 h | ||
Dry to rain 20°C: | 16 h | ||
Fully woterprof | 24 h | ||
Elapsed time before applying next coat: | min. 16 h | ||
Color: | transparent | ||
Pack : | 0,750 l | ||
Code: | 300008170 |
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
BRUSH PROFESSIONAL Sea-Line® BRUSH Sea-Line® ROLL AND HOLDER ROLL Sea-Line® PAINT TRAY Sea-Line® MIXER FOR PAINT Sea-Line® STORAGE – PLASTIC […]
Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount for 750 ml of polyurethane […]
MASKING TAPE MASKING TAPE – MASTER “AQUA” SILVER TAPE – UNIVERSAL MASKING TAPE High-quality masking tape characterized by very good adhesion […]
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
High-gloss clear polyurethane coat recommended to protect wood and ensure a long-term, perfect appearance. Does not require primer. Diluted version […]
Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of spray polyurethane topcoats — […]
PRODUCT DISCRIPTION : O1 TEAK OIL is one-component oil for exotic wood which is difficult to impregnate, e.g.: teakwood, mahogany, […]
Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount for 750 ml of polyurethane […]
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work