Γλώσσα:

S1 PREMIUM ONE STEP, CUT & HIGH GLOSS – στίλβωση πάστα

Αρχική » Προϊόντα » Σύστημα στίλβωσης » S1 PREMIUM ONE STEP, CUT & HIGH GLOSS – στίλβωση πάστα
Kosmetyki do naprawy łodzi oraz jachtów
S1 PREMIUM ONE STEP, CUT & HIGH GLOSS – στίλβωση πάστα

S1 PREMIUM POLISHING COMPOUND – ONE STEP, CUT & HIGH GLOSS


NO SILICONE


TEXTURE :

PACKAGING:

APPLICATION METHODS:

PRODUCT DISCRIPTION :

Sea-Line® S1 PREMIUM guarantees obtaining a very high gloss on the surface in one-stage polishing process.

S1 Premium Compound is designer for surfaces difficult to polish, such as varnishes (also polyurethane ones) plexi or  polycarbonates and laminates. At the same time the used polishing grain gives a very high gloss and efficiently removes defects and grinding scratches after using sandpaper of gradation from P800. (in case of dark colours after using sandpaper of gradation <P1200).

The compound is provided in the form of liquid, it allows for a precise dosing of appropriate amount, depending on the type of the surface that is being polished.

Method of use:

Surface preparation :

Clean the surface destined for polishing. If removing defects is necessary, polish the surface with  sandpaper of the following gradation preliminary polishing: <P500

szlifowanie papierem P800Polish the surface with  sandpaper of final gradation : P800 →.


szlifowanie papierem P1200Dark colours or hard surfaces polish the surface with  sandpaper of final gradation : P1200 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code:   300006613)


Sponge applicators  BRAYT:

gąbka-białaPolishing sponge “PROFI” :

(code :300005933)


Polishing sponge whit velcro :

gabka-polerska-na-rzep-gruba(white – code : 300000384)

(pink- code : 300000385)


Special applicators Sea-Line® :

wełna-białaLamb’s wool type MM Sea-Line

  • (Ø 80 – code : 300006437)
  • (Ø 150 – code : 300005558)
  • (Ø 180 – code : 300005557)


wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean the surface, apply the compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture


max obrotySlowly increase the speed max. to 1800 RPM working with a little pressure


Further steps :

Clean the surface. In order to protect the surface, it is recommended to use:


Technical information:


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę