Γλώσσα:

Labor Day May Holiday

Farby dla jachtów
Labor Day May Holiday

Considering Polish National Holidays May 1th and May 3th our production and logistic will be closed those days.

In our industry, April and May is highest season, so for those who will need technical advice or info about nearest point of sale, please contact us:

April  27-30 from Monday till Thursday, call us from 6:30 a.m. to 1:00 p.m. and from 2:00 p.m. to 7:30 p.m.

May  4-8 from Monday till Friday, call us from 6:30 a.m. to 1:00 p.m. and from 2:00 p.m. to 7:30 p.m.

we are available at the following telephone numbers:
tel. (+48) 94 35 316 75;
tel. (+48) 94 35 316 79;
tel. (+48) 94 35 316 20;
info@sea-line.eu

For all of you around the world from all of us here at Sea-Line HAPPY LABOR DAY!


Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę