Γλώσσα:

Εποξειδικό Filler με φίμπεργκλας (νέος)

Ιστοσελίδα » Προϊόντα » Εποξειδικά υλικά πάχυνσης » Εποξειδικό Filler με φίμπεργκλας (νέος)
Sea Line farby jachtowe
Εποξειδικό Filler με φίμπεργκλας (νέος)

Εποξειδικό Filler με φίμπεργκλας 2:1




ΤύποςΠλαστικά φύλλα GRP, ξύλο, χάλυβα, αλουμίνιο
ΘέσηΠάνω και κάτω από την ίσαλο γραμμή
ΛειτουργίαΒαριές ζημιές, κόλληση
ΕφαρμογήΣτόκος μαχαίρι
Χρώμαανοιχτό γκρι
Πακέτοκώδικας
0,75 κιλό

7,5 κιλό

12204

12290


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Εποξειδικό Filler με φίμπεργκλας (νέος)


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę