Γλώσσα:

OTHER ACCESORIES

Naprawa łodzi
OTHER ACCESORIES


CORK SANDING BLOCK

Uzupełniające akcesoria lakiernicze klocek korkowySanding block made from natural cork. One side is designed to work as effectively as possible, the other is adapted for convenient handing.


Size: 25 x 60 x 105mm300003446

FOAM SANDING BLOCK

Uzupełniające akcesoria lakiernicze kolcek piankowyFoam sanding block made of four types of material, making it very light and yet has a high internal rigidity and increased strength.

Product has two working surfaces:


Size : 140 x 75 mm300003608
Size : 200 x 75 mm300003609
Size : 290 x 75 mm300003610

PLASTIC SANDING BLOCK

Uzupełniające akcesoria lakiernicze kolcek plastikowyGrinding block with grips for abrasive paper.


Size : 165 x 87 mm300000388
Size : 212 x 105 mm300003154

PROTECTIVE FOIL

Uzupełniające akcesoria lakiernicze folia ochronnaPE-HD protective foil, protects from paint, dust and moisture, necessary during lacquering works.


4 x 5 m UNIWERSALNA300005703
4 x 5 m 0,007 mm300001981

PAPER TOWEL (ROLL)

Uzupełniające akcesoria lakiernicze recznik papierowy rolkaPaper towel roll, white, two-ply, made from pure cellulose – 208 m.


 208m300005703

ANTISTATIC RAGS

Uzupełniające akcesoria lakiernicze sciereczki antystatyczneAntistatic rags, dust-absorbent, to clean the dust and dirt from the surface to be painted. Product allowed  to the aqua and 2K systems. Keep in closed package. Don’t  use on the hot surfaces.


10 szt. – size 40 x 80 cm300003842

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę