Γλώσσα:

NEW OFFER! Polishing Past for professionlas

Ιστοσελίδα » Νέα και προσφορές » NEW OFFER! Polishing Past for professionlas
Farby antyporostowe
NEW OFFER! Polishing Past for professionlas
New in offer product S0 – Brayt Sea-Line is polishing paste designed for professionals – companies producing molds and products where the outer layer of the gel coat or industrial topcoat with a high degree of hardness.
S0 removes defects after sanding grit sandpaper even P800 (depending on the hardness of the surface).
Pasta machine is designed to work. Machining maximum speed of 1800 RPM.
Brayt S0 cooperating with wool applicators, and made ​​of hard sponges. We get a surface gloss.
Pastes BRAYT Sea-Line does not contain silicones or fillers which mask features temporarily. Due to such pastes BRAYT Sea-Line is stable and does not go away after wiping the surface with acetone;)
Package 1kg .

Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę