Γλώσσα:

S05 ONE STEP, HEAVY CUT & GLOSS – στίλβωση πάστα

Ιστοσελίδα » Προϊόντα » Σύστημα στίλβωσης » S05 ONE STEP, HEAVY CUT & GLOSS – στίλβωση πάστα
Kosmetyki do naprawy łodzi oraz jachtów
S05 ONE STEP, HEAVY CUT & GLOSS – στίλβωση πάστα

So5 POLISHING COMPOUND – ONE STEP, HEAVY CUT & GLOSS

NO SILICONE




TEXTURE :

PACKAGING:

APPLICATION METHODS:

PRODUCT DESCRIPTION :

Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper of gradation from P800.

Sea-Line® S05 polishing compound is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.

Using S05 polishing compound allows for shortening the labour time thanks to a high cutting force while obtaining appropriate gloss on the surface without the necessity of using other kinds of polishing compounds.

Method of use:

Przygotowanie powierzchni :

Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500

szlifowanie papierem P800Polish the surface with sandpaper of final gradation : P800 →


szlifowanie papierem P1200Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code: 300006613)


Sponge applicators BRAYT:

gąbka-białaPolishing sponge “PROFI” :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :


Special applicators Sea-Line® :

wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean the surface, apply the compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture


max obrotySlowly increase the speed max. to 1800 RPM working with a little pressure


Further steps :

Clean the surface. In order to protect the surface, it is recommended to use:


Technical information:


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę