Epoxy repair kit

This is the Sea-Line epoxy repair kit, designed for repairing minor damages to boat parts.

The epoxy repair kit contains essential products that enable you to carry out the repair.

Weight	Code
250 g	300003636

Technical informations

Color

Clear

Application method

Manually:

brush
roller

Product description "Epoxy repair kit"

Sea-Line® structural epoxy is a comprehensive application:

It works in both the construction and repair of damaged parts of the boat.
This resin is recommended for laminating, sealing, enhancing the surface, bonding and linking the various elements of the structure.
In conjunction with the glass mat, it is used for manual repairs of substantial damage.
The coating has very good adhesion to any type of substrate and very high resistance and hardness.
Component A and B is colorless.

To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.

To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.

The resin is available in three sets:

epoxy resin with hardener
fabric glass (0,25 m 2)
disposable gloves
a brush and a cup with a scale for easy dosing of ingredients
instructions for repair

Type	Laminates, wood, steel, aluminium
Place	Above and below waterline
Function	Laminating, repairs, reinforcement, gluing
Aplplication	Brush, roll
Coats number	Depend on needs
Pot life 23°C	45 min
Hardening time	7 h

Also check

Parafina Sea-Line
Paraffin is an additive mainly to polyester gelcoats, necessary when it is necessary to apply
Parafina Sea-Line
Lamination – fiberglass and glassfabric
Fiberglass reinforcements, including boat mats and fiberglass fabrics combined with resin, are used for repairs
Lamination – fiberglass and glassfabric
Polymer
Is elastic sealant recommended for sealing and bonding various types of materials.
Polymer

Our FAQ answers to frequently asked questions

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Possible causes

Too thin layer of antifouling paint,
Choosing the wrong antifouling to type of a boat or yacht
Thinning of antifouling paint,
Incorrect surface preparation before antifouling application.

How to prevent

Apply the right layer thickness of paint indicated by manufacturer,
Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
Do not thin antifouling because of the risk of reducing effectiveness,
Careful surface preparations (grinding, clearing, degreasing),

How to remove

Wet grinding, apply new layers of antifouling paint.
Use C1 shell and fouling remover.

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.