Wyszukaj na stronie
Menu

Epoxy repair kit

This is the Sea-Line epoxy repair kit, designed for repairing minor damages to boat parts.

The epoxy repair kit contains essential products that enable you to carry out the repair.

WeightCode
250 g300003636
Epoxy repair kit

Technical informations

Color

  • Clear

Application method

Manually:

  • brush
  • roller

Product description "Epoxy repair kit"

Sea-Line® structural epoxy is a comprehensive application:

  • It works in both the construction and repair of damaged parts of the boat.
  • This resin is recommended for laminating, sealing, enhancing the surface, bonding and linking the various elements of the structure.
  • In conjunction with the glass mat, it is used for manual repairs of substantial damage.
  • The coating has very good adhesion to any type of substrate and very high resistance and hardness.
  • Component A and B is colorless.

To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.

To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.

The resin is available in three sets:

  • epoxy resin with hardener
  • fabric glass (0,25 m 2)
  • disposable gloves
  • a brush and a cup with a scale for easy dosing of ingredients
  • instructions for repair

Basic information

TypeLaminates, wood, steel, aluminium
PlaceAbove and below waterline
FunctionLaminating, repairs, reinforcement, gluing
AplplicationBrush, roll
Coats numberDepend on needs
Pot life 23°C45 min
Hardening time7 h

You have questions about the product - Epoxy repair kit

    Also check

    Our FAQ answers to frequently asked questions

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Can I use universal thinner?

    We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

    Wyjście
    Przeiń na górę