Γλώσσα:

MS POLYMER NEW PRODUCT IN OFFER

Ιστοσελίδα » Νέα και προσφορές » MS POLYMER NEW PRODUCT IN OFFER
Kosmetyki do naprawy łodzi oraz jachtów
MS POLYMER NEW PRODUCT IN OFFER

MS POLYMER NEW PRODUCT IN OFFER

MS POLYMER ist one of the most interesting new product in offer Sea-Line in 2018.
Thanks to advance dispensing system, MS POLYMER does not require extra tools to application, provides exact thickness of weld during application.

Characteristic features of MS POLYMER its resistance to UV and water and salt water), no need to priming and can be covered by any type of paint. MS POLYMER does not discolor surface (does not contain thinners and isocyanate).

MS POLYMER is elastic sealant recommended for sealing and bonding various types of materials, available in colors:

MPS PLYMER NOWOŚĆ


Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I use yacht paints for a drinking water tank?

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę