Γλώσσα:

S5 Quick Wax

Farby antyporostowe
S5 Quick Wax

Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss surfaces (laminate, varnish and glass). After use S5 QUICK WAX we get color depth and gloss. Has an excellent hydrophobic and maintenance properties. Does not leave streaks on the plastics and rubber surfaces.

Sea-Line S5 Quick Wax is a product which is recommended after polishing surfaces with Sea-Line polishing compounds.

Wax can be used on surfaces exposed on sunlight.

Does not leave streaks.


Wash the surface before use Sea-Line® S5 QUICK WAX:

BASIC INFORMATION:

S5 QUICK WAX

Typelaminates (gelcoat)
glass
varnished surfaces
plexi, polycarbonate
FunctionUV protection

Reduces the adhesion of dirt

hydrofobic

Textureliquid

COLOR :

PACKAGING:

APPLICATION:

Use:

Cleaning:

For daily maintenance we should use products which will gonna be safe for wax layer:

Technical information:


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę