Linguaggio:

RESINA EPOSSIDICA NEW

Home » Prodotti » Resine » RESINA EPOSSIDICA NEW
Kosmetyki do naprawy łodzi oraz jachtów
RESINA EPOSSIDICA NEW

DESCRIZIONE DEL PRODOTTO :

Per ottenere una laminazione di massima qualità e adeguata durezza usare una miscelazione 2:1 in peso per la fibra di vetro mate, se si utilizza il tessuto di vetro miscelare in rapporto 1:1 in peso.


INFORMACIONI DI BASE:

Tipolaminazione, legno, alluminio, acciaio
Postosotto e sopra la linea di gallegg
Utilizzolaminatura

sigillatura

uniformare la superfice

incollare e collegare vari elementi alla struttura

Resa teorica 1 KGTESSUTO MATE
150 g/m²

300 g/m²

450 g/m²

~3,3 m²

~1,7 m²

~1,1 m²

FIBRA DI VETRO
200 g/m²

400 g/m²

~5 m²

~2,5 m²

Miscelazione a volume100 : 50
Miscelazione a peso100 : 44
Durata della miscela a 23°C45 minutti
Tempo di indurimento a 23°C7 ore

CONFEZIONE :

250 g /  CODICE : 3636 (set)

0,9 kg /  CODICE : 8508 (set)

0,5 kg /CODICE: 8483 (set)

5,0 kg /CODICE: 8506 (comp. A)

             /CODICE: 8507 (comp. B)

IN CONFEZIONI DA :

APPLICAZIONE:

Manualmente:

INFORMAZIONI TECNICHE :


Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę