Langue:

GELCOAT

Accueil » Produits » Mastics » GELCOAT
Sea-Line
GELCOAT

Gelcoat based on IZO/NPG resin, thanks to which it achieves good resistance to weather conditions and high mechanical properties. Primarily recommended for repairing minor scratches and for the production of laminate products. The product is delivered without hardener, you need Metox 30. The gelcoat and the catalyst should be mixed gently.

PRODUCT DESCRIPTION: GELCOAT FOR LAMINATING AND REPAIRS:

It is a gelcoat in RAL 9010 color for versatile use:

BASIC INFORMATION :

Surfacelaminat,
Placeabove and below water line
Functionlaminating, small repairs
Number of Coatsaccording need
Pot Life15-25 min in temperature 20°C
Hardening time24 h in temperature  around 20°C
Colorwhite RAL 9010

PACKAGING :

White RAL 9010 no. SAP 300010262 capacity 1kg,
White RAL 9010 no. SAP 300010263 capacity 250g
METOX 30 no. SAP 300010282 capacity 20 ml
Paraffin corrector, e.g. SAP 300010264, capacity 60 ml

IMPORTANT

The package contains only gelcoat.
The hardener and paraffin corrector must be purchased separately.

HOW TO APPLY GELCOAT:

Manually: brush

HOW TO USE:

First of all, the surface should be degreased and sanded with sandpaper. Remove dust and degrease again.

Mix the base with the hardener in a ratio of 100:3. The gelling time, the so-called potlife, i.e. the possibility of use after mixing the components, is approximately 15-25 minutes at a temperature of approximately 20°C.

FURTHER WORK:

As already mentioned, the gelcoat undergoes oxygen inhibition under the influence of oxygen (it does not dry out, the surface is always sticky). Assuming that in the case of repairs we use the so-called Topcoat can be achieved by adding paraffin concealer. Recommended amount of paraffin corrector 2%-5%.

Technical informations:

TDS Technical Data Sheet
SDS – PRODUCT
SDS – SDS

 

 

GELCOAT kg

GELCOAT g

PARAFINA ml

 


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę