THIN FILM SILVER RACING ANTIFOULING

THIN FILM Silver Racing is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime.
Ideal paint for professional and consumer application on salt and fresh water.
This antifouling is recommended to use on racing boat and powerboats, guaranteeing a smooth finish.
The hard and smooth film, achieved at easy application without sanding between coats, increased speed and efficiently.
Fast drying it’s quick overcoating and flexible launch times.
Easy in application, no need to sand between coats, increased speed and efficiently.
Thinning is not recommended because it reduces the effectiveness of the paint.
THIN FILM Silver Racing Sea-Line® can be applied on hulls made of :
- laminate
- steel
- wooden
- Old antifouling in good condition: Compatibility_chart_antifouling_
- do not use on aluminium and zinc surfaces,
- do not use on primer which include aluminium components
As a primer coat, use Sea-Line® epoxy primer – for example: Sea-Line® Antisorrosiv protection 4:1, Lightprimer 5:1, Universal primer 1K.

Use biocides safely. Always read the label and product information before use.

Type	GRP laminates, wood, steel
Place	Below waterline
Function	Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat.
Application	brush, roll only professional : airless spray gun or conventional spray
Thinning *	No recommended
Theoretical coverage For 1l	by roller	by spray
	11 ~ 12 m²	4 ~ 6 m²
Coat thickness (WTF)	80 μm	160 μm
Finish thickness (DTF)	30 μm	60 μm
Coats number	2	1
Recommended dry layer	60 μm
Hardening the surfaces	23ºC	15ºC
Touch dry	20 minutes	30 minutes
Immersion:	2 hours	3 hours
Dry to recoat (overcoating)	min. 6 hours	min. 10 hours
Dry to launch (immersion times)	max 6 months	max 6 months
Pack	0,75 l	2,0 l
Color	code	code
Graphite	300008380	300008379

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

Antifouling available only in:

Germany
Austri (Österreich)
France
Italian
no UE countries

Voir aussi

Autres produits de cette catégorie

SILVER CRUISE POLISHING ANTIFOULING
Silver Cruise Polishing Antifouling it’s effectively preventing fouling organism: aquatic plants and animals or slime. Ideal paint for professional and […]
SILVER CRUISE POLISHING ANTIFOULING
SILVER SPEED HARD ANTIFOULING
Silver Speed HARD Antifouling is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime. Ideal […]
SILVER SPEED HARD ANTIFOULING
HARD ANTIFOULING
HARD ANTIFOULING paint: Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed […]
HARD ANTIFOULING
LA PEINTURE ANTIFOULING
Est une peinture antifouling adapté pour les eaux salées et douces. La peinture antifouling auto-polissant destinée pour les voiliers et […]
LA PEINTURE ANTIFOULING

Notre FAQ

Réponses aux questions fréquemment posées

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Possible causes

Too thin layer of antifouling paint,
Choosing the wrong antifouling to type of a boat or yacht
Thinning of antifouling paint,
Incorrect surface preparation before antifouling application.

How to prevent

Apply the right layer thickness of paint indicated by manufacturer,
Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
Do not thin antifouling because of the risk of reducing effectiveness,
Careful surface preparations (grinding, clearing, degreasing),

How to remove

Wet grinding, apply new layers of antifouling paint.
Use C1 shell and fouling remover.

Notre offre

Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux

Mastic
Le remplissage des lacunes
Le produit destiné au remplissage des lacunes et à la liquidation des inégalités résultant des dommages ou des inégalités qui […]
Mastic
Primaire epoxydique
La sécurité durable
La protection de la surface du bateau contre l’influence destructrice de l’osmose et de la corrosion dans des conditions difficiles
Primaire epoxydique
Laque et vernis polyurethane
La protection et l’esthétique
La protection contre l’eau et contre l’influence néfaste des rayons UV
Laque et vernis polyurethane
Antifouling
La protection du fond
La protection du fond du bateau contre l’encrassement par les algues et contre les coquillages. La protection contre l’eau
Antifouling
Systeme de polissage
La brillance et la couleur
Une élimination efficace des fissures, le rafraîchissement de la couleur et du brillant du gel coat ou du vernis
Systeme de polissage
Produits de beauté
Entretien et protection
Préparations spéciales pour le nettoyage et la remise en vigueur
Produits de beauté
Résines et kits de reparation
Réparations et laminage
Laminage, collage et de remplissage des fissures dans gelcoat
Résines et kits de reparation
Accessoires
Le remplissage
Beaucoup de produits utiles pour les travaux de construction d’un bateau
Accessoires