HOLOGRAM REMOVAL - POLISHING INSTRUCTION

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

USE:

Removal of holograms and polishing defects caused by polishing
Giving the highest surface gloss

SURFACE:

Varnishes, paints and any color gelcoat

EFECT:

Smooth, free from defects, high gloss finish without any holograms

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

OTHERS POLISHING INSTRUCTION:

Practical advice:

Do not push polishing machine to surface
For the beginning do not apply too much polishing compound, grain should be ground completely during polishing process
Apply more polishing compound only when it is necessary, you will save material used to polishing process

Voir aussi

Autres threads de cette catégorie

LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION USE: Renewing the gelcoat surface of light color with mechanical damage and scratches that […]
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
DARK COLOR GELCOAT – POLISHING INSTRUCTION
DARK COLOR GELCOAT – POLISHING INSTRUCTION USE: Removal of discoloration, chalking gelcoat, dull Renewing any surface color which has a small […]
DARK COLOR GELCOAT – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION USE: Renewing any paint or varnish color which has small mechanical damages Yellowing and […]
PAINT AND VARNISH – POLISHING INSTRUCTION
RENEWING THE SURFACE WITHOUT GRINDING
RENEWING THE SURFACE WITHOUT GRINDING – POLISHING INSTRUCTION USE: Renewal of any color with small mechanical damages and small scratches […]
RENEWING THE SURFACE WITHOUT GRINDING

Notre FAQ

Réponses aux questions fréquemment posées

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Possible causes

Incorrect proportion of base and herdener,
Too low temperature of ambient and surface (less than 10ﹾC),
Mixing two components from two different manufacturers,

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during the whole hardening process,
Use base and hardener from the same manufacturer

How to remove

The uncured mass requires complete removal from the surface.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

Notre offre

Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux

Mastic
Le remplissage des lacunes
Le produit destiné au remplissage des lacunes et à la liquidation des inégalités résultant des dommages ou des inégalités qui […]
Mastic
Primaire epoxydique
La sécurité durable
La protection de la surface du bateau contre l’influence destructrice de l’osmose et de la corrosion dans des conditions difficiles
Primaire epoxydique
Laque et vernis polyurethane
La protection et l’esthétique
La protection contre l’eau et contre l’influence néfaste des rayons UV
Laque et vernis polyurethane
Antifouling
La protection du fond
La protection du fond du bateau contre l’encrassement par les algues et contre les coquillages. La protection contre l’eau
Antifouling
Systeme de polissage
La brillance et la couleur
Une élimination efficace des fissures, le rafraîchissement de la couleur et du brillant du gel coat ou du vernis
Systeme de polissage
Produits de beauté
Entretien et protection
Préparations spéciales pour le nettoyage et la remise en vigueur
Produits de beauté
Résines et kits de reparation
Réparations et laminage
Laminage, collage et de remplissage des fissures dans gelcoat
Résines et kits de reparation
Accessoires
Le remplissage
Beaucoup de produits utiles pour les travaux de construction d’un bateau
Accessoires