Wyszukaj na stronie
Menu

Epoxy resin

Our epoxy resin works well both in construction and during repairs of damaged boat and yacht parts.

WeightCode
250 g3636
0,5 kg8483
0,9 kg8508
5 kg8506 (comp. A) / 8507 (comp. B)
Epoxy resin

Technical informations

Color

  • Transparente

Application method

Manually:

  • brush
  • roller

Product description "Epoxy resin"

  • Sea-Line® structural epoxy is a comprehensive application.
  • It works in both the construction and repair of damaged parts of the boat.
  • This resin is recommended for laminating, sealing, enhancing the surface, bonding and linking the various elements of the structure.
  • In conjunction with the glass mat, it is used for manual repairs of substantial damage.
  • The coating has very good adhesion to any type of substrate and very high resistance and hardness.
  • Component A and B is colorless.
  • To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.
  • To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.

The resin is available in 3 sets:

  • Set of 250 g
    includes an epoxy resin with hardener, fabric glass (0,25 m 2), disposable gloves, a brush and a cup with a scale for easy dosing of ingredients and instructions for repair.
  • Set of 0,9 kg
    includes an epoxy resin with hardener
  • Set of 0,5 kg and 5,0 kg
    includes an epoxy resin with hardener

Basic information

TypeLaminates, wood, steel, aluminum
PlaceAbove and below waterline
FunctionLaminating, repairs, reinforcement, gluing
ApplicationBrush, roll
ThinningNot recommended
 Theoretical coverage for 1kg

(for 1 layer laminate)

performance for layer of laminate based on glass fibre mats
300 g/m²

450 g/m²

~1,7 m²

~1,1 m²

performance for layer of laminate based on glass fabric (roving)
200 g/m²

400 g/m²

~5 m²

~2,5 m²

Coats numberDepend on needs
Pot life 23°C45 min
Hardening time7 h

Surface preparation

To achieve a high-quality and sufficiently strong laminate, use the following weight ratio:

  • For mats, use a 2:1 ratio – 2 kg of polyester resin for 1 kg of powdered glass mat
  • For fabrics, use a 1:1 ratio – 1 kg of polyester resin for 1 kg of glass fabric

Further work

For finishing the laminated sections, we recommend using materials such as:

  •  Sea-Line® epoxy fillers
  •  Sea-Line® epoxy primers
  •  Sea-Line® topcoats

You have questions about the product - Epoxy resin

    Also check

    Our FAQ answers to frequently asked questions

    Can I add more hardener to speed up the reaction?

    Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.

    Can I use yacht paints for a drinking water tank?

    Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

    Wyjście
    Przeiń na górę