Parafina Sea-Line

Paraffin is an additive mainly to polyester gelcoats, necessary when it is necessary to apply the gelcoat to the outer surface of the finished laminate.

Gelcoat with the addition of paraffin corrector is topcot. By adding paraffin to the gelcoat, we will stop the phenomenon of oxygen inhibition, which is the reason why the gelcoat does not dry out and the surface remains sticky.

Capacity	Code
60ml	300010264

Technical informations

Safety data sheet SDS

Product description "Parafina Sea-Line"

Recommended amount of paraffin 2%-5%.
Mixing proportions of ingredients: gelcoat: hardener: paraffin 100:3:2-5

Always remember about health and safety.

Before working with chemical products, make sure you have read the SDS and TDS.
Use protective gloves, eye/face protection when handling the product, and wear a mask if instructed to do so.
Store the product in a tightly closed container at room temperature (15-25°C).
Protect from sunlight and frost.

Also check

Lamination – fiberglass and glassfabric
Fiberglass reinforcements, including boat mats and fiberglass fabrics combined with resin, are used for repairs
Lamination – fiberglass and glassfabric
Polymer
Is elastic sealant recommended for sealing and bonding various types of materials.
Polymer
Non Skid Powder
Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount
Non Skid Powder

Our FAQ answers to frequently asked questions

Possible causes

Wrong viscosity and spraying technique,
Failure to maintain proper evaporation time and thickness of layers,
Incorrect spraying pressure,
Too low temperature of varnish, surface or space ,
Wrong thinner or hardener.

How to prevent

Apply the right type of application method indicated by manufacturer,
Use working spray guns,
Both the object and material must have room temperature of 20ﹾC,
Apply correct proportion of base and hardener.

How to remove

Grinding and polishing,
Grinding and painting,

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.