Wyszukaj na stronie
Menu

WE SWITCH S3 TO NEW VERSION. WHY?

Analyzing the most common use of S3 liquid so far we have come to the conclusion that our customers use it primarily to clean the surface after polishing, and for protection is preferable to use wax S4.

We concluded to modified S3 liquid to meet the needs of our customers and produced the next generation S3 FINISH CLEANER product.

The new S3 FINISH CLEANER:

  • removes the remnants of polishing dust from the surface,
  • allows check quality of the polished surface
  • used as final step of the polishing process to significantly emphasize the gloss.

Does not contain silicone, teflon and fillers. Used together with other Sea-Line polishing materials, gives excellent results on gelcoats and lacquered surfaces.

More information : S3 Finish Cleaner

WE SWITCH S3 TO NEW VERSION. WHY?

Also check

Our FAQ answers to frequently asked questions

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Wyjście
Przeiń na górę