Wyszukaj na stronie

Epoxy resin

Our epoxy resin works well both in construction and during repairs of damaged boat and yacht parts.

WeightCode
250 g3636
0,5 kg8483
0,9 kg8508
5 kg8506 (comp. A) / 8507 (comp. B)
Epoxy resin

Color

  • Transparente

Application method

Manually:

  • brush
  • roller

Product description "Epoxy resin"

  • Sea-Line® structural epoxy is a comprehensive application.
  • It works in both the construction and repair of damaged parts of the boat.
  • This resin is recommended for laminating, sealing, enhancing the surface, bonding and linking the various elements of the structure.
  • In conjunction with the glass mat, it is used for manual repairs of substantial damage.
  • The coating has very good adhesion to any type of substrate and very high resistance and hardness.
  • Component A and B is colorless.
  • To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.
  • To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.

Basic information

TypeLaminates, wood, steel, aluminum
PlaceAbove and below waterline
FunctionLaminating, repairs, reinforcement, gluing
ApplicationBrush, roll
ThinningNot recommended
 Theoretical coverage for 1kg

(for 1 layer laminate)

performance for layer of laminate based on glass fibre mats
300 g/m²

450 g/m²

~1,7 m²

~1,1 m²

performance for layer of laminate based on glass fabric (roving)
200 g/m²

400 g/m²

~5 m²

~2,5 m²

Coats numberDepend on needs
Pot life 23°C45 min
Hardening time7 h

Surface preparation

The resin is available in 3 sets:

  • Set of 250 g
    includes an epoxy resin with hardener, fabric glass (0,25 m 2), disposable gloves, a brush and a cup with a scale for easy dosing of ingredients and instructions for repair.
  • Set of 0,9 kg
    includes an epoxy resin with hardener
  • Set of 0,5 kg and 5,0 kg
    includes an epoxy resin with hardener

You have questions about the product - Epoxy resin

    Also check

    Our FAQ answers to frequently asked questions

    Can I paint a boat, previously painted with 1 component paint, with polyurethane?

    It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

    Why did the polyurethane topcoat become dull?

    Possible causes

    • Too short time for evaporation of the thinner,

    How to prevent

    • Maintain the right conditions for complete evaporation of the thinner,

    How to remove

    • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
    • Polish surface if needed.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę