Wyszukaj na stronie
Menu

C3 Shampoo With Wax

C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and painted surfaces. High cleaning power and finish in gloss.

Shake well before use. Let a small amount dissolve in warm water and clean the vessel. After treatment, always rinse with fresh water. Polish with a dry, soft cloth to retrieve a high gloss shine.

CapacityCode
250 ml300006980
C3 Shampoo With Wax

Technical informations

Color

  • milky

Application method

Manually:

  • soft brush
  • cloth

Product description "C3 Shampoo With Wax"

The wax in Sea-Line® C3 SHAMPOO WITH WAX does not damage plastic components.

Consistency:

  • Thick liquid

Odour:

  • Citric

Solubility in water:

  • 100%

C3 Shampoo With Wax - instructional video

Surface preparation

  • Clean the surface with water to remove sand and stones.
  • Shake the container containing C3 shampoo with wax before use.
  • Dissolve a small amount of the product in lukewarm water.
  • Wash the surface thoroughly to remove any dirt.
  • Rinse thoroughly with water to remove any shampoo residue.

Further work:

  • To achieve a higher shine, polish the surface by hand (with a soft cloth) after it dries.
  • If necessary, the surface can be additionally protected with wax.

You have questions about the product - C3 Shampoo With Wax

    Also check

    Our FAQ answers to frequently asked questions

    Can I use yacht paints for a drinking water tank?

    Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Is it necessary to always sand the surface between application of two different products?

    We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

    Wyjście
    Przeiń na górę